Suspension and Steering

The Powerflex BMW & Mini jack pad adapter is designed to fit into the plastic lifting points found on your BMW and Mini.  It helps with lift st...

PFF5-1321 Upper Engine Mount Insert are a simple, but effective rod design made from our Yellow 70A material. They fill the key voided areas of the...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006) MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014) MINI Countryman...

This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006)

The original gearbox mounts fitted to these cars feature heavy voiding and as a result allow the engine and gearbox to move excessively under accel...

PFF5-225 Upper Gearbox Mount Insert fills the voiding in the OEM gearbox mount, reducing engine and transmission movement for sharper gear changes ...

VIEW VIDEOThe factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively, and even ...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #6 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

This insert fits OE part number 22316754424. This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006)

This part will not upper engine support brackets on models 2004 onwards if using oil filled engine mounts. This part fits the following models: MI...

Check size to confirm before ordering.This part fits vehicles with a 16mm sway bar diameter.OEM Part Number: 33556754823 This part fits the follow...

PFF5-224provides an excellent balance of strength and compliance for improved performance, while limiting NVH transmission into the cabin.Available...

Designed to replace the softer rubber voided OE mount that is prone to cracking, allowing for excessive engine movement and wheel hop, PFF5-220 Low...

This bushing increases the negative camber by -1.25°.If fitting PFF5-132G we recommend  fitting PFF5-101G to bring the caster back to standard. Th...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

PFF5-1302G Front Arm Rear Bush Caster Offset is a CNC-machined Aluminium mount with polyurethane bushing providing approximately 1 deg of caster of...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Diagram Reference #1 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)

PFR5-1103 is a complete bushing kit that fits into trailing arm brackets with OE numbers: 33306799089 33306799090, 33309807099 and 3330980710. For ...

This part does not replace the engine mount bushing.PFF5-124 is a quick and easy way to stiffen the OE oil-filled engine mount, improving throttle ...

PFR5-1104 is a complete bushing. It fits later Gen1 models from 2003 onwards with a diameter of 60mm, for the earlier models with a diameter of 80m...

PFF5-107 is an insert that fits into the original bushing. For full bushing replacement, seePFF5-120 This part fits the following models: MINI MIN...

This replaces the complete original bushing in bracket. If you would like to fit an insert only then please usePFF5-107. This bushing comes with an...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

OEM Part Number: 33326768726OEM Part Number: 33326768724 This part fits the following models: MINI MINI Cooper Gen 1 R50 / R52/ R53 (2001-2006) MI...

Fits F54 through F60 MINI models, and F39 through F49 BMW models.The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass...

PFF5-1322 Gearbox Moun Bushing Insert is made using the Yellow 70A durometer material and has been designed to fill the voids in the OE mount for a...

PFR5-1313BLK Diagram Reference #13 This part fits the following models: F45 2 Series Active Tourer, F48 F49 X1 (2016-ON) F39 X2 (2017+) F40...

Diagram Reference #3 Please measure the sway bar diameter before ordering. This part fits the following models: MINI Gen 2 Clubman F54 (2015+) ...

Powerflex Handling Packs contain bushings that have been specifically selected to give the perfect combination of value versus performance based on...

Diagram Reference #3 Please measure the sway bar diameter before ordering. This part fits the following models: MINI Gen 2 Clubman F54 (2015+) ...

Powerflex PFF5K-201 Front Wishbone Rear Bushings & Bracket fits MINI Gen 1 R50/R53 and uses our existing PFF5-101 bushing. A long-lasting, bett...

MINI front control arm bushings are notorious failure points in their respective suspension systems. The original bushings are notably soft from th...

OEM Part Number: 18307616850 This part fits the following models: BMW 2 Series F22 2 Series Coupe RWD (2014+) F22 2 Series Coupe xDrive AWD (2014+...

Special replacement driveshaft stake nuts for use withPFF5-132G. 2 x Nuts included in this kit. This part fits the following models: MINI MINI Coo...

Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn, as the bushing deflects more th...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

Stiffer sway bar bushings (also commonly referred to as anti roll bar bushings) reduce play and deflection in the sway bar. Rubber bushings tend to...

PFR5-1311 fits in the outer position on both the upper and lower-rear arms, so x2 sets are needed to do both. This part fits the following models:...

This part fits the following models: BMW 1 Series F40 1 Series (2018+) 2 Series F44 2 Series Gran Coupe (2019+) F44 2 Series Gran Coupe (2019+) X S...

Diagram Reference #7 This part fits the following models: MINI MINI Cooper Gen 2 R55/ R56 / R56 (2007-2014)